作者： kerric

7-Series Fume Hood

Products Included:
Series 7 Bench Fume Hood
Series 7 Floor-Standing Fume Hood
Series 7 Air Supply Fume Hood

6-Series Fume Hood

Features of Series 6 Bench-Type Fume Hood

A: The viewing window adopts 5mm tempered glass, which will not splash when broken, protecting personal safety.
B: The top lampshade integrates explosion pressure relief function.
C: The air collecting hood is equipped with a condensed water collection device, which directly drains condensed liquid in pipelines into the waste water system.
D: Equipped with double mechanical anti-falling locking mechanism for viewing window. If the transmission device on one or both sides breaks, the falling distance of the window is ≤80mm.
E: Adopts toothed synchronous belt transmission. The window pushes and pulls smoothly with low noise. Steel wires are wrapped by synchronous belts to effectively resist corrosion.
F: Narrow frame design maximizes internal space of the cabinet.
G: Surface wind speed ranges from 0.4 to 0.5m/s, and tracer gas concentration is lower than 0.01ppm.
H: Modular lining design. Materials such as HPL, ceramic and PP are optional according to experimental requirements, adapting to diverse laboratory environments.
I: Equipped with water, electricity and gas modules to flexibly meet application demands.
J: The product can be optional with pipeline fire safety detection system and concentration detection & treatment system.
K: The lower cabinet has negative pressure exhaust function, which can store ordinary reagents and prevent peculiar smell caused by volatile gas.L: The lower cabinet can be optionally fitted with locked fireproof cabinets for storing a small amount of flammable, combustible and corrosive drugs and reagents.

5-Series Fume Hood

Features of Series 5 Bench Fume Hood

A: The viewing window is made of 5mm tempered glass, which will not shatter and splash, ensuring personal safety.
B: The top lamp cover also functions as an explosion pressure relief device.
C: The air collecting hood is equipped with a condensed water collection device, which directly drains condensed liquid in the pipeline into the waste water system.
D: Equipped with double mechanical anti-falling locking mechanism for viewing window. If the transmission device on one or both sides breaks, the falling distance of viewing window shall be ≤80mm.
E: Adopts toothed synchronous belt transmission. The window slides smoothly with low noise. Steel wires are wrapped inside the synchronous belt to effectively resist corrosion.
F: Adopts advanced air flow layout and diversion design. Average surface wind speed of exhaust air is 0.4–0.5m/s, and leakage rate is within 0.01ppm.
G: The product can be optionally equipped with pipeline fire safety detection system and concentration detection & treatment system.
H: The lower cabinet features negative pressure exhaust function, suitable for storing common reagents and preventing peculiar smell caused by volatile gas.I: The lower cabinet can be optionally fitted with locked fireproof cabinets for storing small quantities of flammable, combustible and corrosive chemicals and reagents.

Anti-falling double mechanical locking for viewing window

7-series all steel Laboratory Bench

Product Features

A: Adopts integral arc design, which not only creates a soft and smooth appearance, but also reduces collision and injury risks.
B: Fully adopts pre-embedded mechanical screw technology to prevent self-drilling screws from damaging surface coatings.
C: Designed with 90*90 fan-shaped round pipes, no intermediate frame support is required within 3 meters, improving flexible utilization under the countertop.
D: Suspended reagent racks improve the utilization rate of the work surface.
E: Mortise and tenon structure enables convenient and fast installation.
F: Linear load capacity ≥ 400kg per meter.G: Flexible and diverse color matching creates a warm and modern atmosphere for laboratories.

6-series all steel Laboratory Bench

Product Features
A: Combined of cabinet body and upper & lower frames made of high-strength aluminum alloy, featuring high structural strength and excellent corrosion resistance.
B: All frame connectors are made of high-strength plastic. Adjustable feet are installed on lower frame connectors to facilitate overall leveling.
C: Adopts pre-embedded mechanical screw technology to prevent self-drilling screws from damaging surface coatings.
D: Cabinet panels adopt 3D convex embedded double-layer structure, filled with sound insulation materials inside.
E: The upper frame supports the countertop in all directions, delivering superior load-bearing capacity, keeping the countertop flat and deformation-resistant.
F: The lower frame adopts ergonomic inclined design, ensuring comfortable standing operation without foot collision.
G: Linear load capacity ≥400kg per meter, drawer load ≥40kg, door panel load ≥90kg, cabinet shelf load ≥40kg.H: Diverse and flexible color matching creates a warm and modern atmosphere for laboratories.

5-series all steel Laboratory Bench

The 5 series, with green environmental protection, convenient operation, and practicality as its core design concepts, is committed to achieving a perfect integration of high quality and superior cost-effectiveness. The product has a clean and beautiful appearance, a flexible and stable structure, practical and convenient functions, and provides laboratory assembly solutions that can significantly improve the optimization level and reliability of the laboratory environment.